Ubiquiti 5 GHz PowerBeam ac, 400 mm, ISO
PBE-5AC-400-ISO – effective Ubiquiti interference protection
The Ubiquiti PowerBeam PBE-5AC-400-ISO is an innovative product that increases RF isolation and eliminates interferences.
The AP/Bridge/CPE type device works in the 802.11ac standard. This results in achievable 450 Mbps bandwidth in the 5 GHz band.
The use of solid components result in high durability. It can be used at temperatures ranging from -40 to 70 degrees Celsius. Its outer plastic casing is resistant to UV radiation.
The device uses an Atheros MIPS 74KC 560 MHz processor. The device uses 64 MB internal memory and 16 MB flash drive memory. The device works in the 5,170 - 5,875 MHz band.
The PBE-5AC-400-ISO interference protection system can be used in locations with high wave density. It is used to reduce data loss on connectors. The device is not only efficient but also easy to install and affordable.
The device uses the AirMax AC technology which not only increases its efficiency but also boosts latency and resistance to interference.
The device is equipped with a 25 dBi maximum gain antenna. Increased RF isolation is combined with interference filtering and RF shielding.
- works in the 5 GHz band
- 450 Mbps bandwidth
- 25km range
- 25 dBi antenna power gain
- 1,000 Mbit/s maximum data transfer speed
- AirMAx AC technology
|FREQUENCY||5 GHz||5 GHz||5 GHz|
|THROUGHPUT||450+ Mbps||450+ Mbps||450+ Mbps|
|RANGE||20+ km||25+ km||25+ km|
|ANTENNA GAIN||22 dBi||25 dBi||27 dBi|
|NETWORKING INTERFACE||(1) 10/100/1000 Ethernet Port||(1) 10/100/1000 Ethernet Port||(1) 10/100/1000 Ethernet Port|
|Power over Ethernet (PoE)||Y|
|AC input voltage||24|
|Frequency band||5.150 - 5.250, 5.250 - 5.350, 5.470 - 5.725, 5.725 - 5.850|
|Antenna gain level (max)||25|
|Dimensions (WxDxH)||459 x 261 x 459|
|Certification||FCC, IC, CE, RoHS|
|Colour of product||White|
|Operating relative humidity (H-H)||5 - 95|
|Operating temperature (T-T)||-40 - 70|