Ubiquiti NanoBeam (PowerBeam) M Series, 2GHz 18dBi dual pol
PBE-M2-400 – practical Ubiquiti radio system
The Ubiquiti NanoBeam PBE-M2-400 works in the 2.4 GHz band.
PBE-M2-400 is equipped with a 560 MHz Atheros MIPS 74KC processor. The device uses 64 MB internal memory and 8 MB flash drive memory.
The use of InnerFeed technology allows for the integration of the antenna emitter with the radio module or the router/access point. The antenna is characterised by a maximum gain of 18 dBi.
Mounting the device is effortless and quick. The installation of the PBE-M2-400 is easy and intuitive.
The PBE-M2-400 device is AirMax compliant which leads to interference-free transmission.
The device can work in Router or Bridge mode. The Wi-Fi interface supports Access Point, Access Point WDS, Client and Client WDS modes.
- works in the 2.4 GHz mode
- 150 Mbps bandwidth
- 20 km range
- 18 dBi antenna gain
- router or bridge work mode
- construction resistant to outdoor conditions
- 420 x 420 x 289 mm size
High efficiency, affordable price and other advantages of the product make the PBE-M2-400 a very smart investment.
|Frequency Band||5 GHz||5 GHz||5 GHz||2.4 GHz|
|Antenna Gain||29 dBi||25 dBi||22 dBi||18 dBi|
|Dish Reflector||620 mm||400 mm||300 mm||400 mm|
|Throughput||150+ Mbps||150+ Mbps||150+ Mbps||150+ Mbps|
|Range||30+ km||25+ km||20+ km||20+ km|
|Colour of product||White|
|Antenna type||Sector antenna|
|Survival wind speed||200|
|Antenna gain level (max)||18|
|Certification||FCC, IC, CE|
|Frequency band||2.405 - 2.475|
|Operating relative humidity (H-H)||5 - 95|
|Operating temperature (T-T)||-40 - 70|